Energy Conservation – Chariot Energy https://chariotenergy.com Texas Renewable Electricity Providers for Businesses & Homes Wed, 19 Aug 2026 18:31:55 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://chariotenergy.com/wp-content/uploads/2024/11/cropped-Chariot_CMYK_Sun-Chariot_1C-Orange-1-150x150.png Energy Conservation – Chariot Energy https://chariotenergy.com 32 32 Why Are Electricity Bills Going Up on the ERCOT and PJM Grids? https://chariotenergy.com/blog/why-texas-electricity-bills-going-up-data-centers-ai/ Tue, 18 Aug 2026 19:58:47 +0000 https://chariotenergy.com/?p=24291 Texas electricity bills are climbing as AI and hyperscale data centers surge ERCOT demand. Here is what is really driving 2026 residential prices and four moves Texas homeowners can make right now.

The post Why Are Electricity Bills Going Up on the ERCOT and PJM Grids? appeared first on Chariot Energy.

]]>
Data Centers, AI, and What It Means for You

Texas electricity bills are going up because demand on the ERCOT grid is growing faster than on any other major U.S. grid, and artificial intelligence and hyperscale data centers are the single largest driver. The U.S. Energy Information Administration expects annual electricity load in ERCOT to grow by an average of 10% between 2025 and 2027, against 3% on PJM, the next fastest market (U.S. Energy Information Administration, 2025). And this is not a Texas-only story. On PJM, the largest grid in the United States, the same data center surge has already pushed wholesale capacity costs to record highs and put real dollars onto household bills. Three separate costs reach you through the same monthly statement: the new generation being built to serve that demand, the transmission needed to move it, and the Winter Storm Uri debt Texas is still paying down. Here is what is really happening across the two biggest U.S. power markets in 2026, why ERCOT and PJM are moving in the same direction, and the specific moves a Texas residential homeowner can make to blunt the impact right now.

Scope note: this guide focuses on Texas residential electricity plans. Chariot also serves commercial and industrial customers. The plan structures and consumer protections discussed below apply to residential (home) customers only.

Key Takeaways

  • Texas transmission providers have reported enough contracted and officer-attested large load projects to put ERCOT peak demand near 208,000 megawatts by 2030, with data centers accounting for roughly 78,000 megawatts of that figure (ERCOT Long-Term Load Forecast Update, April 2025). ERCOT discounts that raw number for its own planning, because not every announced project gets built.
  • For scale, ERCOT’s record actual peak was 91,308 megawatts, set on July 22, 2026 (The Texas Tribune, July 2026). Even ERCOT’s more conservative planning estimates put 2030 demand at 130,000 to 150,000 megawatts (Office of the Lieutenant Governor of Texas, March 2025).
  • The pattern is national. On the PJM grid, which serves more than 67 million people across 13 states and Washington, D.C., data centers drove an estimated 63% of the price increase in the 2025 to 2026 capacity auction (Monitoring Analytics via IEEFA, 2025).
  • Texas residential customers paid an average of 16.44 cents per kilowatt-hour as of May 2026, below the U.S. average of 18.44 cents (EIA Electric Power Monthly, May 2026). The Texas Energy Poverty Research Institute projects the average household could pay about $580 more per year in 2030 than in 2025 (TEPRI, reported September 2025).
  • Senate Bill 6, effective September 1, 2025, forces large loads to shoulder more of their own grid costs and adds protections for residential customers (Baker Botts, July 2025).
  • Locking in a fixed rate, choosing a plan backed by real Texas solar generation, and tightening home efficiency are the moves that pay back fastest in 2026.

See where you stand in about five minutes. Compare Chariot’s 100% solar residential plans against what you are paying today.

Why Are Texas Electricity Bills Going Up in 2026?

Texas residential electricity bills are rising because the ERCOT grid is under three pressures at once: a demand surge that outpaces new generation, transmission buildout that has to catch up, and legacy cost recovery from Winter Storm Uri that is still being paid down. Every one of those pressures shows up as a rider, a delivery charge, or a rate change on residential bills.

The average Texas residential rate was 16.44 cents per kilowatt-hour as of May 2026, according to the EIA Electric Power Monthly. On a typical 1,000 kilowatt-hour summer month, that is around $164 in energy charges before delivery fees. For most Texas residential customers, the bill has quietly climbed over the last two years even before summer peak charges kick in, and the pressure is set to keep building through the end of the decade.

How Fast Is Texas Electricity Demand Actually Growing?

Data center server racks illuminated in a dark facility representing AI and hyperscale power demand
Data centers and AI workloads are the single largest driver of new electricity demand on both the ERCOT and PJM grids through 2030.

ERCOT is the fastest growing major power market in the country. The EIA expects annual electricity load in the ERCOT region to grow by an average of 10% between 2025 and 2027, more than three times the 3% it forecasts for PJM over the same period (U.S. Energy Information Administration, 2025).

The long-range picture is larger still. In ERCOT’s April 2025 long-term load forecast, Texas transmission service providers reported enough contracted and officer-attested large load projects to put 2030 peak demand at about 208,000 megawatts, of which roughly 78,000 megawatts is data center load (ERCOT Long-Term Load Forecast Update, April 2025). That number is a request-driven ceiling rather than a prediction, and ERCOT now applies its own downward adjustment for planning purposes precisely because many announced projects never get built. Even the adjusted view is dramatic: ERCOT has estimated 2030 demand at 130,000 to 150,000 megawatts against a 2024 peak of roughly 86,000 megawatts (Office of the Lieutenant Governor of Texas, March 2025).

To put that in context, ERCOT’s record actual peak is 91,308 megawatts, set on July 22, 2026 (The Texas Tribune, July 2026). Adding tens of gigawatts on top of that inside five years means building generation and the transmission required to move power from where it is produced to where it is used. Much of that cost ultimately flows through into wholesale prices and delivery charges on residential bills.

What Role Do Data Centers and AI Play in Rising Bills?

Data centers and AI facilities are the single largest driver of the 2025 to 2030 demand surge on the ERCOT grid. Goldman Sachs projects that US data center power demand will roughly double from about 31 gigawatts in 2025 to 66 gigawatts in 2027, taking data centers from 4.1% to 8.5% of total US peak summer demand (Goldman Sachs, 2025). A disproportionate share of that growth is landing in Texas because of cheap land, permissive permitting, and access to the ERCOT interconnection queue.

Inside ERCOT specifically, the scale of the request pipeline is the story. Data center load in the 2030 forecast rose from 29,614 megawatts in ERCOT’s 2024 collection to 77,965 megawatts in the 2025 collection, a jump of more than 48,000 megawatts in a single year (ERCOT Long-Term Load Forecast Update, April 2025). No other load category on the Texas grid moved anywhere near that far that fast.

Texas has begun to respond by making large loads part of the solution rather than only part of the problem. Senate Bill 6 gives ERCOT the authority to disconnect large non-critical loads during a firm load shed event, and pairs that with a voluntary demand response program under which loads of 75 megawatts or more can ramp down or switch to on-site generation when the grid is tight (Utility Dive, 2025). The intent is to keep a data center boom from pushing residential customers into peak wholesale pricing during extreme weather.

This Is Not Just Texas: What the PJM Grid Already Shows

If you want a preview of where unchecked data center demand takes a power grid, look at PJM Interconnection, the largest grid operator in the United States. PJM manages the flow of electricity for more than 67 million people across 13 states and Washington, D.C., from Illinois and Ohio through the Mid-Atlantic to Virginia (PJM, July 2025). It is a different market than ERCOT, but it is being hit by the same force, and it is further down the road.

The evidence is in PJM’s capacity auctions, the mechanism that pays generators to be available when demand peaks. The cost of that capacity for the 2025 to 2026 delivery year rose from about $2.2 billion to about $14.7 billion in a single auction (Utility Dive, 2024). PJM’s independent market monitor, Monitoring Analytics, estimated that data centers were responsible for about 63% of that price increase, roughly $9.3 billion in added cost recovered from customers (IEEFA, 2025).

It did not stop there. The auction held in July 2025, covering the 2026 to 2027 delivery year, cleared at the FERC-approved price cap of $329.17 per megawatt-day across the entire footprint, for a total of about $16.1 billion (PJM, July 2025). The following auction cleared at the cap again, at $333.44 per megawatt-day and about $16.4 billion (Utility Dive, 2025). Much of that pressure traces back to Northern Virginia’s “Data Center Alley,” the largest concentration of data centers in the world.

For households on the PJM grid, this is not theoretical. IEEFA estimated the 2025 to 2026 auction alone would add roughly $18 a month to the average residential bill in western Maryland and about $16 a month in Ohio (IEEFA, 2025). That is the cost of a data center buildout arriving on ordinary family bills, and it is the same direction ERCOT is heading. The difference is that Texas still has time, and Texas homeowners still have tools, to lock in protection before the curve steepens.

Do not wait for the curve to catch up. Lock in a Chariot fixed rate now, or talk to our team about the right plan for your home.

How Much Have Texas Electricity Bills Actually Increased?

Texas residential bills are climbing on two tracks: the underlying energy rate and the fixed delivery and rider charges that utilities recover on your monthly statement. The Texas residential average of 16.44 cents per kilowatt-hour as of May 2026 is higher than recent years (EIA, May 2026), and forecasters expect the direction to hold. The Texas Energy Poverty Research Institute, an Austin nonprofit, projects Texas electricity rates rising another 29% through 2030, which would leave the average household paying about $580 more per year in 2030 than in 2025 (TEPRI, reported September 2025).

There is also a legacy line item most homeowners forget: Winter Storm Uri. After the February 2021 storm, the Public Utility Commission of Texas authorized ERCOT to securitize an uplift balance of up to $2.1 billion in extraordinary costs incurred by load serving entities, financed through recovery bonds with final maturities running out to 2052 (ERCOT HB 4492 Securitization). Those bonds are repaid through charges collected from electricity customers in the ERCOT region, which is why a storm from five years ago is still a component of what Texans pay today.

What Is Senate Bill 6 and Why Should Homeowners Care?

Senate Bill 6, effective September 1, 2025, is the Texas legislature’s main policy response designed to protect residential customers as new large loads (data centers, hydrogen facilities, industrial parks) plug into the ERCOT grid. The bill overhauls how large loads are interconnected, how they share reliability responsibilities, and how their infrastructure costs are allocated (Baker Botts legal analysis, July 2025).

At a homeowner level, the takeaway is straightforward: without SB 6, the transmission and reliability costs of AI-driven demand growth would flow disproportionately into residential rates, the way they already have on PJM. With SB 6, large loads carry more of their own weight. That is a partial fix, not a rollback of the underlying price pressure, but it matters. Lieutenant Governor Dan Patrick said of the bill: “I am prioritizing SB 6 because it strengthens the Texas electric grid and will ensure its reliability while managing our state’s growth over the coming years. SB 6 will make our state more attractive for investors across the globe while protecting residential consumers from rising costs.” (Office of the Lieutenant Governor of Texas, March 19, 2025).

What You Can Do About It: The 4L Playbook for Texas Homeowners

Chariot’s homeowner framework for 2026 is the 4L Playbook: Lock, Layer, Lower, Log. Each of the four levers is something a Texas residential customer can act on this month.

Lock: Get on a Fixed-Rate Plan Before Summer Peak

A fixed-rate electricity plan protects you from the wholesale price spikes that happen in Texas during extreme weather. The ceiling on that exposure is not hypothetical. During Winter Storm Uri, the PUCT ordered wholesale prices in ERCOT to $9,000 per megawatt-hour, close to 300 times the typical pre-storm price (ERCOT HB 4492 Securitization). Customers on fixed-rate plans were insulated from that wholesale price. Customers on indexed and variable products were not. Locking a competitive fixed rate ahead of June is the single highest-return move most Texas residential customers can make in 2026.

The savings compound if you lock a 24 or 36 month term rather than a short term that resets you into the peak season. Compare a Chariot fixed rate against your current effective rate to see what the difference is for your own usage.

Ready to lock your rate? Browse Chariot fixed-rate plans and pick a term that carries you past summer peak.

Layer: Choose Power Backed by Real Texas Solar

Aerial view of a Texas suburban neighborhood under a bright blue sky
Every Chariot residential plan is matched to power from Hanwha’s utility-scale Texas solar farms, no rooftop panels required.

Here is the part most Texas homeowners miss: you do not need panels on your roof to put solar behind your meter. Chariot Energy is a subsidiary of 174 Power Global, part of the Hanwha Group, one of the largest solar developers in the world (About Chariot Energy). That parentage is not a logo on a website. It is generation. Chariot’s standard residential plans, the everyday fixed-rate plans most customers choose, are 100% solar-matched, and a share of that comes from utility-scale solar farms Hanwha built right here in Texas.

The clearest example is the Oberon Solar Farm outside Odessa in Ector County: a 180-megawatt facility spanning more than 1,200 acres with more than 560,000 panels, which 174 Power Global completed in 2020 and which produces enough electricity to power about 30,000 Texas homes a year. Chariot holds a power purchase agreement for 30 megawatts of Oberon’s output to support its renewable retail offering (174 Power Global, August 2020). When AI-driven demand is pushing the whole grid toward more expensive, more volatile power, choosing a plan already backed by local solar generation is a structural hedge, not a marketing line. It is the same clean, Texas-built power whether you rent an apartment in Houston or own a house in the suburbs.

If you do have rooftop panels, you can go one step further and add a solar buyback plan to earn credit for the excess energy your system exports back to the grid. But the core move, and the one available to every Texas home, is simply choosing a plan powered by Hanwha’s solar farms in the first place.

Want power backed by Texas solar? See Chariot’s 100% solar plans.

Lower: Squeeze Real Efficiency Out of Your Home

Smart thermostat mounted on a wall showing energy efficient home temperature control
Setting a smart thermostat back 7 to 10 degrees Fahrenheit for 8 hours a day can cut annual heating and cooling costs by up to 10%.

Home efficiency has become genuinely valuable again now that rates are climbing. Three of the highest-return moves for a Texas residential home:

  • Use a thermostat setback. The U.S. Department of Energy estimates you can save as much as 10% a year on heating and cooling by turning the thermostat back 7 to 10 degrees Fahrenheit for 8 hours a day from its normal setting (U.S. Department of Energy).
  • Weatherize the envelope. The Texas Department of Housing and Community Affairs reports that weatherization measures reduce average annual energy costs by up to $413 per home (TDHCA Weatherization Assistance Program).
  • Swap any remaining incandescent bulbs for LEDs. LED lighting products produce light up to 90% more efficiently than incandescent bulbs, which release about 90% of their energy as heat (ENERGY STAR). In a Texas summer, that wasted heat is something your air conditioner then has to remove.

None of these are glamorous on their own, but together they compound with the Lock and Layer moves. For a deeper walkthrough see our guide on how to save money on your Texas electricity bill.

Log: Watch Your Usage Like an Owner

The last L is the one Texas homeowners skip. Log your monthly usage. Your Smart Meter Texas data, your Chariot online account, and even a simple spreadsheet will show you a spike two months before it wrecks a bill. If your average kilowatt-hour usage jumps 15% one month with no lifestyle change, something is off, usually the HVAC system or a failed weather seal, and it is worth an hour to diagnose.

Should You Lock In a Fixed Rate Before Summer 2026?

For most Texas residential customers, yes. Locking a fixed rate before June is the fastest, most reversible move you can make against 2026 price pressure. The downside of locking a competitive fixed rate is limited because rates are trending up rather than down, and the volatility risk of variable plans is at its highest in exactly the months when your home uses the most power.

If you are on a variable, indexed, or expiring fixed plan today, this is the month to run a plan comparison and switch. If your current plan expires in late summer, the standard advice is to shop 30 to 45 days out, but in 2026 shopping now and moving early is often the better call.

Run the numbers today. Compare Chariot plans against your current rate, or talk to our team if you want a hand reading your bill.

Why Chariot Energy Is Built for This Moment

Chariot Energy was designed for exactly the market Texas is entering: rising underlying demand, more volatility, and residential customers who want a predictable rate backed by real solar generation. As a subsidiary of 174 Power Global within the Hanwha Group, Chariot does not just buy solar credits on the open market. Our standard residential plans are 100% solar-matched, backed in part by utility-scale solar farms Hanwha developed in Texas, including the 180-megawatt Oberon Solar Farm in Ector County. Our fixed rates are built to hold through summer peaks, and for homeowners with panels, our solar buyback plans add credit for the energy your system exports.

If you are a Texas residential customer watching your bill climb, the fastest step is to compare a Chariot fixed-rate or solar plan against what you are paying today. In most cases, five minutes of shopping is the difference between absorbing the 2026 rate curve and locking it out of your household budget. Explore Chariot residential plans or talk to our team.

Frequently Asked Questions

Are electricity bills going up because of AI?

Yes, in large part. AI training and inference workloads sit behind the majority of new large load requests on the ERCOT grid, where data center load in the 2030 forecast jumped from 29,614 megawatts to 77,965 megawatts in a single year of ERCOT collection (ERCOT, April 2025), and the same force drove an estimated 63% of the capacity price increase on the PJM grid (Monitoring Analytics via IEEFA, 2025). AI does not directly raise your residential rate line item, but the generation, transmission, and reliability spending needed to serve AI loads does show up in wholesale prices and delivery charges over time.

Is the data center problem only in Texas?

No. It is a national grid story. PJM Interconnection, which serves more than 67 million people across 13 states and Washington, D.C., saw its capacity costs jump from about $2.2 billion to about $14.7 billion in the 2025 to 2026 auction (Utility Dive, 2024), and IEEFA estimated that added roughly $16 to $18 a month to average residential bills in parts of Ohio and western Maryland (IEEFA, 2025). Texas and ERCOT are on the same trajectory, which is why acting early matters here.

How is Chariot’s electricity 100% solar if I do not have panels?

Chariot matches your usage to power generated by utility-scale solar farms, including projects its parent company, 174 Power Global (part of the Hanwha Group), developed in Texas, such as the 180-megawatt Oberon Solar Farm near Odessa. You still receive normal, reliable grid electricity. Chariot backs it with solar generation through long-term agreements, so no rooftop system is required.

When will Texas electricity prices peak?

Analyst forecasts vary, but most point to the late 2020s. The Texas Energy Poverty Research Institute projects Texas rates rising another 29% through 2030, leaving the average household paying about $580 more per year than in 2025 (TEPRI, reported September 2025). Prices will not move in a straight line, and weather-driven spikes will still be sharpest during summer peak months.

Does Senate Bill 6 lower my residential electricity bill directly?

No, not directly. SB 6, effective September 1, 2025, reallocates a larger share of interconnection and reliability costs onto large loads such as data centers. It slows the rate at which those costs flow into residential bills, but it does not roll back the rate you pay today.

Is a fixed-rate electricity plan really lower risk in Texas?

For most residential customers, yes. Variable and indexed plans expose you to wholesale price volatility. During Winter Storm Uri, the PUCT ordered ERCOT wholesale prices to $9,000 per megawatt-hour, close to 300 times the typical pre-storm price (ERCOT HB 4492 Securitization). A competitive fixed rate trades a little upside in a mild year for a lot of downside protection in a bad one.

Can I switch electricity providers if I am mid-contract?

Yes. Most Texas residential electricity contracts include an early termination fee, and the amount is disclosed on your Electricity Facts Label. Under Public Utility Commission of Texas rules, you can switch without paying that fee during the final 14 days of your contract term, and switching does not interrupt your service (Public Utility Commission of Texas, Your Rights as a Customer). If your rate is significantly above the current market, the switch can be worth the fee even mid-term.

How do I know if my current rate is competitive?

Compare your effective rate (bill amount divided by kilowatt-hours used) against the 16.44 cents per kilowatt-hour Texas residential average as of May 2026 (EIA) and, more importantly, against a fresh Chariot quote for the same usage profile. If you are more than 1 to 2 cents above a competitive fixed rate at your usage level, it is worth running the comparison.

Bottom Line

Rising bills are not a mystery. Data centers and AI are pulling harder on ERCOT and PJM than on any other US power markets, new infrastructure is expensive, and Winter Storm Uri costs are still being unwound. PJM already shows what that looks like on a household bill. Texas still has room to get ahead of it. You cannot slow the demand curve, but you can control what you pay by locking a fixed rate, choosing power backed by Hanwha’s Texas solar farms, tightening efficiency, and watching your usage every month. That is the 4L Playbook, and it works. Compare Chariot plans now or talk to our team to get started.

Plan details, rates, and fees are subject to change. Rate comparisons in this article are as of May 2026 and reflect residential Texas market averages. An Electricity Facts Label (EFL) is available for every plan at chariotenergy.com/home-electricity-plans. Terms and conditions apply. Subject to credit approval.

The post Why Are Electricity Bills Going Up on the ERCOT and PJM Grids? appeared first on Chariot Energy.

]]>
A Simple Yet Efficient Guide to Cost Effective Cooling | Chariot Energy, Texas https://chariotenergy.com/blog/a-simple-yet-efficient-guide-to-cost-effective-cooling-chariot-energy-texas/ Fri, 01 May 2026 13:14:00 +0000 https://chariotstg2020.wpenginepowered.com/?p=21198 What is the Best Way to Cut Home Electricity Bills? A Guide for Cost Effective Cooling. Keeping your home comfortable year-round can be costly, but there are numerous strategies you can employ to reduce these expenses. Whether you’re looking to save on heating during the winter or cooling in the summer, the key lies in […]

The post A Simple Yet Efficient Guide to Cost Effective Cooling | Chariot Energy, Texas appeared first on Chariot Energy.

]]>
What is the Best Way to Cut Home Electricity Bills? A Guide for Cost Effective Cooling.

Keeping your home comfortable year-round can be costly, but there are numerous strategies you can employ to reduce these expenses. Whether you’re looking to save on heating during the winter or cooling in the summer, the key lies in adopting cost-effective measures that enhance energy efficiency. Below, we’ll explore the best ways to cut your home heating and cooling bills, with a focus on “Cost Effective Cooling.”

1. Improve Home Insulation Promotes Cost Effective Cooling

The Importance of Proper Insulation

One of the most effective ways to reduce heating and cooling costs is by improving your home’s insulation. Proper insulation ensures that your home retains heat during the winter and stays cool during the summer, reducing the need for excessive heating or cooling. According to the U.S. Department of Energy, homeowners can save up to 15% on heating and cooling costs by properly insulating their homes .

Types of Insulation

  • Attic Insulation: Since heat rises, your attic is one of the most important areas to insulate. Consider adding blown-in cellulose or fiberglass batts to improve thermal resistance.
  • Wall Insulation: If your walls are poorly insulated, they can let heat escape during winter and let in heat during summer. Blown-in or spray foam insulation can be a cost-effective solution for existing walls.

2. Upgrade to a Programmable Thermostat

Benefits of Programmable Thermostats in Cost Effective Cooling

A programmable thermostat allows you to set specific temperatures for different times of the day, ensuring that you’re not wasting energy when you’re not home. By adjusting the temperature by just a few degrees when you’re away or asleep, you can reduce your heating and cooling bills significantly. The U.S. Environmental Protection Agency (EPA) estimates that homeowners can save around $180 a year by using a programmable thermostat .

Smart Thermostat Options

  • Nest Learning Thermostat: Learns your schedule and programs itself.
  • Ecobee SmartThermostat: Offers room sensors to manage hot or cold spots.

3. Seal Air Leaks

Identifying Air Leaks

Air leaks around doors, windows, and other openings can significantly increase your heating and cooling costs by allowing air to escape or enter your home. Sealing these leaks is a simple and cost-effective way to improve your home’s energy efficiency.

How to Seal Air Leaks

  • Caulking and Weatherstripping: Apply caulk around windows and doors and add weatherstripping to stop drafts.
  • Use Draft Stoppers: Place draft stoppers at the base of doors to prevent cold air from entering and warm air from escaping.

4. Utilize Energy-Efficient Windows for Cost Effective Cooling

The Role of Windows in Energy Efficiency

Windows can be a major source of energy loss, especially if they’re old or single-paned. Upgrading to energy-efficient windows can reduce your heating and cooling costs by minimizing heat transfer.

Types of Energy-Efficient Windows

  • Double-Paned Windows: These windows have two layers of glass with a layer of air or gas in between, providing better insulation.
  • Low-E Windows: Low-emissivity windows have a special coating that reflects heat, keeping your home warmer in winter and cooler in summer.

5. Maintain Your HVAC System

Regular Maintenance for Efficiency

Your heating, ventilation, and air conditioning (HVAC) system plays a crucial role in your home’s comfort and energy consumption. Regular maintenance, such as replacing filters and servicing the system, ensures it runs efficiently, reducing your energy bills.

Professional HVAC Tune-Ups

Consider scheduling annual tune-ups with a professional to ensure your HVAC system is operating at peak efficiency. This can prevent costly breakdowns and extend the life of your system.

6. Consider Alternative Energy Sources

Solar Energy for Cost-Effective Cooling

Solar energy is a sustainable and cost-effective way to power your home, especially for cooling needs. By installing solar panels, you can harness the sun’s energy to power your air conditioning, significantly reducing your electricity bills. ChariotEnergy.com offers affordable and reliable solar energy plans that can help you cut your cooling costs while also contributing to a greener environment.

Incentives for Solar Energy

Many states offer incentives and rebates for installing solar panels, making this option even more cost-effective. Check with your local government or visit ChariotEnergy.com for more information on available incentives.

Conclusion

Reducing your home heating and cooling bills doesn’t have to be complicated. By improving your insulation, upgrading to a programmable thermostat, sealing air leaks, using energy-efficient windows, maintaining your HVAC system, and considering alternative energy sources like solar power, you can achieve cost-effective cooling and heating. Not only will these strategies lower your energy bills, but they will also make your home more comfortable and environmentally friendly. For more information on how to save on your energy costs, visit ChariotEnergy.com today.


References:

  1. U.S. Department of Energy. “Insulation and Air Sealing.” energy.gov
  2. Environmental Protection Agency. “Programmable Thermostats.” epa.gov

The post A Simple Yet Efficient Guide to Cost Effective Cooling | Chariot Energy, Texas appeared first on Chariot Energy.

]]>
Electricity Bill kWh Calculator: Estimate Your Home Electricity Usage and Costs https://chariotenergy.com/blog/kwh-calculator/ Mon, 20 Apr 2026 16:31:15 +0000 https://chariotenergy.com/?p=24081 Use our free kWh calculator to estimate how much electricity your home appliances use and what they cost to run. Learn about typical energy usage for Texas homes and find practical ways to reduce your electricity bill.

The post Electricity Bill kWh Calculator: Estimate Your Home Electricity Usage and Costs appeared first on Chariot Energy.

]]>
Understanding how much electricity your home uses can feel like guessing in the dark. Between air conditioners running nonstop in July, that old refrigerator humming along 24/7, and all the gadgets plugged in around the house, it adds up fast. Our kWh calculator takes the guesswork out of your electricity bill by showing you exactly how much energy each appliance uses.

Whether you want to find ways to cut costs, compare your usage against the Texas average, or simply understand what “kilowatt-hour” actually means, this tool and guide have you covered.

See What You Could Save on a Renewable Plan

Lock in a fixed rate with 100% renewable energy. No hidden fees, no surprises.

Shop Chariot Energy Plans

Try Our kWh Calculator

Enter your electricity rate, add the appliances you use most, and get an instant estimate of your daily, monthly, and yearly energy consumption along with estimated costs.

kWh Calculator

Add your appliances below to estimate your electricity usage and monthly cost.

The average Texas residential rate is about 14¢/kWh. Check your bill for your exact rate.

Add an Appliance

Your Estimated Usage

0
kWh/Day
0
kWh/Month
0
kWh/Year
Estimated Monthly Cost
$0.00
Based on your rate of 14.0¢/kWh

What Is a kWh?

A kilowatt-hour (kWh) is the standard unit that electricity providers use to measure your energy consumption. It represents the energy needed to power a 1,000-watt appliance for one hour. Your monthly electricity bill is based on the total number of kWh your household uses.

Here are some simple examples to help it click:

  • A 1,000-watt microwave running for 1 hour = 1 kWh
  • A 100-watt light bulb left on for 10 hours = 1 kWh
  • A 50-watt ceiling fan running for 20 hours = 1 kWh

Both scenarios use the same amount of energy, just at different rates over different periods of time.

How to Calculate kWh

The formula is straightforward:

kWh = (Watts x Hours Used) / 1,000

For example, a 2,400-watt clothes dryer running for 1 hour uses 2.4 kWh. A 150-watt refrigerator running 24 hours a day uses 3.6 kWh per day, which adds up to about 108 kWh per month. That constant draw is why refrigerators can be one of the bigger items on your bill, even though they do not use that much power at any given moment.

Common Household Appliance Energy Usage

Every appliance in your home pulls a different amount of electricity. Some use a lot of power for short bursts (like a clothes dryer), while others use less power but run for hours on end (like your refrigerator or HVAC system). Here is a breakdown of typical residential appliances and what they cost to run.

Heating and Cooling

In Texas, your HVAC system is almost always the biggest line item on your electricity bill, especially during summer. Here is what these systems typically draw:

  • 3-Ton Central AC: 2,570 watts (typical for homes under 2,000 sq ft)
  • 4-Ton Central AC: 3,450 watts (larger homes, 2,000+ sq ft)
  • Space Heater: 1,500 watts
  • Ceiling Fan: 60 to 75 watts

Running a 3-ton AC for 8 hours on a hot Texas day uses about 20.6 kWh, which could cost around $2.88 at 14¢/kWh. Over a full summer month, that AC alone might account for 600+ kWh on your bill.

Kitchen Appliances

  • Refrigerator: 100 to 200 watts (runs 24/7, averaging about 150W)
  • Electric Oven: 2,000 to 2,500 watts
  • Microwave: 1,000 to 1,500 watts
  • Coffee Maker: 900 to 1,200 watts
  • Dishwasher: 1,200 to 1,800 watts
  • Toaster: 800 to 1,400 watts

Your refrigerator might only draw 150 watts, but because it runs around the clock, it uses about 108 kWh per month. Compare that to a microwave at 1,500 watts that only runs for 10 to 15 minutes a day, using just 7 to 11 kWh per month.

Laundry

  • Clothes Washer: 400 to 600 watts
  • Clothes Dryer: 1,800 to 2,400 watts

Dryers are one of the most power-hungry appliances in a typical home. Running a dryer for an hour uses about 2.4 kWh. If you do five loads per week, that is roughly 48 kWh per month just from drying clothes.

Water Heating

  • Electric Water Heater: 4,000 to 4,500 watts

Electric water heaters use a lot of power, but they cycle on and off rather than running continuously. A typical household uses around 3 to 4.5 kWh per day for water heating, depending on household size and usage habits.

Electronics and Other

  • TV (LED/OLED, 55"): 80 to 130 watts
  • Computer (desktop): 100 to 300 watts
  • Video Game Console: 60 to 200 watts
  • LED Light Bulb: 8 to 12 watts
  • Pool Pump: 1,000 to 1,500 watts

Pool pumps are a hidden electricity hog in many Texas homes. Running a 1,500-watt pool pump for 8 hours a day adds about 360 kWh to your monthly bill. Upgrading to a variable-speed pump can cut that usage significantly.

Tired of Guessing What You'll Pay?

A fixed-rate Chariot plan keeps your per-kWh price the same all year, even when Texas summers spike demand.

See Our Fixed-Rate Plans

How Much Electricity Does the Average Texas Home Use?

The average Texas household uses about 1,109 kWh per month, which is roughly 36 to 37 kWh per day. That is higher than the national average of about 886 kWh per month, largely because of the hot summers that keep air conditioning running from May through October.

Here is how Texas usage breaks down by season:

  • Summer (June through September): 1,300 to 1,800 kWh/month
  • Spring and Fall: 800 to 1,000 kWh/month
  • Winter: 900 to 1,200 kWh/month (varies by heating type)

If your monthly usage is consistently above 1,500 kWh, it is worth checking for inefficient appliances, poor insulation, or an oversized HVAC system.

Tips to Lower Your Electricity Usage

Once you know where your energy goes, here are practical ways to reduce it:

  1. Set your thermostat strategically. Every degree you raise your thermostat in summer can save 1 to 3% on cooling costs. Try 78°F when you are home and 82 to 85°F when you are away.
  2. Seal air leaks. Gaps around windows, doors, and ductwork force your HVAC to work harder. Weatherstripping and caulking are inexpensive fixes that pay for themselves quickly.
  3. Upgrade to ENERGY STAR appliances. When it is time to replace an appliance, choose ENERGY STAR certified models. They use 10 to 50% less energy than standard versions.
  4. Use a smart thermostat. Programmable and smart thermostats learn your schedule and automatically adjust, so you are not cooling an empty house.
  5. Switch to LED bulbs. LEDs use about 75% less energy than incandescent bulbs and last 25 times longer.
  6. Run appliances during off-peak hours. Some electricity plans offer lower rates during off-peak times. Running your dishwasher or laundry at night can save money.
  7. Unplug vampire loads. Devices like phone chargers, game consoles, and cable boxes draw small amounts of power even when turned off. Use power strips to easily cut the draw.

Power Your Home With 100% Renewable Energy

Pair smart energy habits with a Chariot plan built on wind and solar. Enroll online in minutes.

Compare Plans

How Your Electricity Plan Affects Your Bill

The kWh calculator shows you how much energy you use, but the total cost depends on your electricity rate. In the deregulated Texas market, you have the power to choose a plan that fits your usage pattern.

At Chariot Energy, we offer 100% renewable energy plans with fixed rates, so you know exactly what you will pay per kWh for the length of your contract. No hidden fees, no surprises. Combined with the energy-saving tips above, choosing the right plan can make a meaningful difference in your monthly electricity costs.

Browse our residential electricity plans to find the right fit for your home.

kWh Calculator FAQ

How do I calculate my electricity cost per kWh?

Multiply your total kWh used by your rate per kWh. For example, if you use 1,100 kWh in a month at 14¢/kWh, the energy portion of your bill would be about $154 before taxes and fees.

Is 40 kWh per day a lot?

The average Texas home uses about 37 kWh per day, so 40 kWh is slightly above average. It is not unusual during summer months when AC runs heavily, but if you see 40+ kWh consistently, it is worth investigating which appliances might be driving the high usage.

What uses the most electricity in my home?

For most Texas homes, heating and cooling systems account for about 50% of total electricity usage. After HVAC, the biggest draws are typically the water heater, clothes dryer, and electric oven. Pool pumps are another significant contributor if you have a pool.

How can I find my current electricity rate?

Your rate per kWh appears on your monthly electricity bill, usually in the "charges" or "usage detail" section. You can also log in to your electricity provider's account portal. If you are a Chariot Energy customer, your rate is available in your online account.

What is the average electricity bill in Texas?

Based on the average usage of 1,109 kWh/month and an average rate of about 14¢/kWh, the typical Texas electricity bill runs around $155/month for the energy portion. Actual bills vary based on your plan, usage, TDU delivery charges, and local taxes.

Ready to Lower Your Electricity Bill?

Now that you know how much energy you use, find a plan that fits. Chariot offers 100% renewable, fixed-rate electricity across Texas.

Shop Residential Plans

The post Electricity Bill kWh Calculator: Estimate Your Home Electricity Usage and Costs appeared first on Chariot Energy.

]]>
Winter Weather Preparedness for Texas Commercial & Industrial Facilities https://chariotenergy.com/blog/winter-weather-preparedness-for-texas-commercial-industrial-facilities/ Wed, 21 Jan 2026 20:16:50 +0000 https://chariotenergy.com/?p=23685 Extreme winter weather can disrupt business operations across Texas with little notice. Freezing temperatures, icy roads and frozen precipitation don’t just impact comfort, they affect employee safety, facility integrity, transportation and power reliability. With winter conditions expected across parts of Texas this weekend, now is the time for commercial and industrial organizations to review preparedness […]

The post Winter Weather Preparedness for Texas Commercial & Industrial Facilities appeared first on Chariot Energy.

]]>

Extreme winter weather can disrupt business operations across Texas with little notice. Freezing temperatures, icy roads and frozen precipitation don’t just impact comfort, they affect employee safety, facility integrity, transportation and power reliability.

With winter conditions expected across parts of Texas this weekend, now is the time for commercial and industrial organizations to review preparedness plans and reduce operational risk.

Below is a practical winter preparedness guide designed specifically for Texas C&I facilities.

1. Monitor Road Conditions & Plan for Workforce Safety

Icy roads are one of the most immediate risks during winter weather events in Texas. Freezing rain can make highways and surface streets unsafe, limiting employee commutes and disrupting logistics.

Recommended actions:

  • Encourage remote work where possible to reduce travel risks
  • Stagger shifts or delay start times for essential on-site staff
  • Pause non-critical deliveries during peak freezing periods
  • Communicate travel expectations clearly and early

Texas Road Conditions Resource

Before employees travel, reference the official Texas Department of Transportation road conditions map:

DriveTexas.org
This live map shows:

  • Road closures and icy conditions
  • Traffic incidents
  • Weather-related hazards by region

Facilities managers and operations teams should monitor this resource throughout the event to make informed staffing and logistics decisions.

2. Protect Facilities & Infrastructure from Cold Damage

Extreme cold can strain building systems that aren’t designed for prolonged freezing temperatures, especially in Texas.

Facility preparation checklist:

  • Insulate exposed pipes and shut off outdoor water sources
  • Confirm heating systems are fully operational
  • Inspect roofs and drainage areas for ice or debris buildup
  • Secure exterior equipment and loose materials
  • Verify backup power systems and fuel levels

Powering down non-essential equipment ahead of the storm can reduce damage risk from outages or voltage fluctuations.

3. Prepare for Power Outages & Grid Stress

Winter storms can overload the grid and damage utility infrastructure, leading to temporary outages.

Best practices for outage readiness:

  • Identify critical systems that must remain powered
  • Back up essential data and systems
  • Establish clear internal protocols for shutdowns and restarts
  • Ensure emergency lighting and safety systems are functional

While Chariot Energy supplies electricity, local utility providers own and maintain the infrastructure and are responsible for restoration efforts during outages.

If an outage occurs, contact your utility provider directly for real-time updates and restoration timelines.

4. Communicate Early & Often

Clear communication is one of the most effective risk-management tools during winter weather events.

Consider:

  • Sending pre-storm notifications to employees and tenants
  • Assigning a single point of contact for operational updates
  • Sharing safety expectations and contingency plans
  • Providing regular status updates as conditions evolve

Prepared teams respond faster and recover sooner.

Stay Informed. Stay Prepared.

Winter weather in Texas may be unpredictable, but preparation reduces disruption, protects people and safeguards operations.

For real-time travel conditions, facility readiness tips and operational planning guidance, bookmark these resources and revisit them before each winter event.

Preparing your facility ahead of winter weather helps protect people, property and productivity. Bookmark this guide and check road conditions before travel this weekend.

References

The post Winter Weather Preparedness for Texas Commercial & Industrial Facilities appeared first on Chariot Energy.

]]>
5 Energy Savings Tips You Need to Know for 2026 https://chariotenergy.com/blog/energy-saving-tips/ Sat, 06 Dec 2025 02:29:00 +0000 https://chariotstg2020.wpenginepowered.com/?p=1717 You’ve heard it time and time again: Save energy! But why should you take extra steps to save energy in your everyday life? Well, it’s simple: Unless you have a 100% renewable energy plan, you’re emitting greenhouse gases when you consume electricity so cutting back on your usage helps reduce the carbon emissions you release […]

The post 5 Energy Savings Tips You Need to Know for 2026 appeared first on Chariot Energy.

]]>
You’ve heard it time and time again: Save energy! But why should you take extra steps to save energy in your everyday life? Well, it’s simple: Unless you have a 100% renewable energy plan, you’re emitting greenhouse gases when you consume electricity so cutting back on your usage helps reduce the carbon emissions you release into the environment.

The second — and more obvious — reason to cut back your energy use is to save money! The less energy you use in your daily life, the less money you are spending every month on your electricity bill. It’s a win-win for you and the planet!

Start by implementing these five easy things you can do around your house to cut back your energy consumption (and save you some real bucks!). 

1. Unplug

The easiest step of the five, this involves unplugging items around your house that are not in use. Even when an object is plugged in but not being used it is still using energy and costing you money. Save on your energy bill by unplugging items like these: 

  • Coffee machine
  • Chargers
  • Toasters or blenders
  • Stereos or speakers
  • Lamps
  • Television consoles

Consider investing in power strips around your house for a quick and efficient way to turn off power to your appliances not being used without having to individually unplug each one. 

2. Use Cold Water to Wash Clothes and Other Laundry Tips

There are several benefits to washing your clothes in cold water. Not only is it gentler on your clothes, but a huge chunk of energy goes into heating water for loads of laundry, so by washing on a cold or lukewarm setting, you cut the energy usage down substantially. 

You can take it a step further and use the high speed or extended spin cycle on your load of laundry to get out as much moisture as possible before putting your clothes in the dryer. This will cut down on dryer time and energy used.1

Lastly, try to do a full load of laundry every time. If you have to do a small load, make sure you change the load size setting on your washing machine to small or extra small. Find more ways to reduce laundry energy use, including full-load strategies and air drying, by clicking here.

3. Replace Your Light Bulbs with LEDs

Replacing the light bulbs around your house to energy-efficient light bulbs is one of the more important steps to saving energy around your house. The average household has a total of 45 light bulbs, which can quickly add up on your energy bill if you aren’t using efficient light bulbs. Most energy-efficient light bulbs on the market save an average of 75% more energy than standard incandescent bulbs — not to mention that they last for years. That means you won’t have to replace your bulbs as often, which saves you money and cuts down on the amount of non-recyclable waste you produce. 

A traditional 60 watt bulb found in your bathroom would cost you about $5 yearly if you kept it on for 2 hours a day, while an equivalent LED bulb only cost about $1 per year.2 Now, multiply that by 44 other light bulbs you have in your home. The solution is clear, replace your light bulbs and save some big bucks. Learn more about how LED lighting compares to traditional bulbs and how to choose the right ones in this guide.

4. Adjust Your Thermostat

Your thermostat is the source of some of your biggest energy eaters – the air conditioning and heating system. An easy tip to stick to that you can implement right away is to adjust your thermostat two degrees when you are not home. In the summer, adjust your thermostat two degrees warmer and in the winter, adjust it two degrees cooler. If you want to take it a step further, adjust your thermostat by five degrees, either warmer or cooler, when you aren’t home. 

If you don’t want to worry about having to remember to make these adjustments, you can also replace your home thermostat with a smart thermostat. With a WiFi-enabled smart thermostat, your thermostat will automatically adjust your heating and cooling temperature setting for optimal performance. According to the Department of Energy, smart thermostats “that earn the ENERGY STAR label have been independently certified, based on actual field data, to deliver energy savings.”1

5. Change Your Air Filter Regularly

While an obvious step, step number five often gets pushed aside when it comes to household chores. If you have a dirty air filter, it will cause the air to move slower, thus making the system work harder to keep your house warm or cool. 3

A clean filter will also prevent dust from building up in the system – leading to maintenance issues or a system failure. At a minimum, change your air filter every three months, but if you notice it starting to get dirty sooner than three months, it is beneficial to change it more frequently. 

By taking the time to implement these five easy steps into your everyday routine, you can save energy and save money. With actions as easy as these, why wouldn’t you? 


Sources:

  1. https://www.energy.gov/sites/prod/files/2017/10/f37/Energy_Saver_Guide-2017-en.pdf
  2. https://www.saveonenergy.com/energy-saving-hacks/
  3. https://www.energystar.gov/index.cfm?c=products.pr_save_energy_at_home

The post 5 Energy Savings Tips You Need to Know for 2026 appeared first on Chariot Energy.

]]>
Top 10 Ways to Prepare Your Home for the Texas Winter Season https://chariotenergy.com/blog/winter-prep-tips/ Thu, 13 Nov 2025 16:58:33 +0000 https://chariotstg2020.wpenginepowered.com/?p=1535 Now is an excellent time to start thinking about getting your home ready for winter weather. Winterizing Your Home will reduce energy consumption, keep you warmer, extend the life of your home’s systems, eliminate safety hazards, and save money during the winter months. Here are ten ways to winterize your Texas home. 1. Inspect your home’s […]

The post Top 10 Ways to Prepare Your Home for the Texas Winter Season appeared first on Chariot Energy.

]]>
Now is an excellent time to start thinking about getting your home ready for winter weather. Winterizing Your Home will reduce energy consumption, keep you warmer, extend the life of your home’s systems, eliminate safety hazards, and save money during the winter months. Here are ten ways to winterize your Texas home.

1. Inspect your home’s heating and air conditioning system

Before the weather turns cold, have your HVAC system inspected by a reputable HVAC contractor. Regularly servicing your furnace helps you catch problems before expensive breakdowns, prolong the furnace’s life, and keep it running more efficiently.

Chariot Tip: Did you know that you can use 100% green energy in your home without installing solar panels at rates competitive with regular electricity?

2. Flush & insulate your water tank

Be sure that your water heater is working well. These should be flushed twice a year and preferably before winter begins so that they are ready to be used. Save on fuel by wrapping the water heater in a blanket of insulation and setting the temperature to 120 degrees.

Chariot tip: Did you know that a tankless water heater can provide money and energy savings as well as shut down when not in use after winter is over.

3. Check the seal on exterior wood

The exterior wood trim on your home needs to be protected from the elements. Replacing rotted trim can get costly. A yearly inspection can prevent expensive repairs. Make sure that the caulk is not cracked, and your paint is not chipped or flaking away. If it is, scrape away the bad paint and old caulk, apply new caulk and a fresh coat of paint.

4. Do a quick energy audit and check for air leaks

Fall is also an excellent time to consider a professional energy audit and to inspect your door and window seals. Hold a candle in front of possible drafts. If the flame wavers, you have an air leak. Seal a leaking door by installing foam or felt weatherstripping inside the doorframe. If you don’t have double pane windows, covering your windows with plastic is an inexpensive way to seal out drafts.

5. Insulate hot water pipes

Exposed pipes waste heat by cooling off the water running through them. Insulate the hot water pipes in your basement or crawl space by snapping foam sleeves on them.

6. Make sure your safety detectors are working

Most house fires happen in winter. Test all of your smoke detectors to make sure they are working and that they have good batteries. If your home does not have carbon monoxide detectors, consider getting some.

7. Clean your chimney

Get your fireplace cleaned and inspected before you start building those cozy fires. A chimney sweep company will make sure the fireplace is safe to use, and it can also identify maintenance problems. Heated or cooled air rises and escapes when you leave the fireplace damper open. When the fireplace is not in use, shut the flue.

8. Clean out your gutters

Once the leaves are off the trees, it’s time to clean the gutters. Gutters can back up and overflow, and when they overflow, that water runs down your home, speeding up the deterioration of your exterior. If channels are blocked and the weather gets freezing, water will turn into ice and add weight to the gutters, which could cause them to tear away from the house.

9. Prepare your outdoor water pipes

Dealing with a burst water pipe is every homeowner’s fear. Make sure your sprinkler system is properly shut down for the season. Your outside water faucet is unprotected from the elements. It will freeze over in winter and could flood the basement. Disconnect outdoor hoses and shut the water valve off to your outside spigot, then go outside, open the exterior spigot valve and let the water drain out of the line.

10. Clear dead trees and branches

Before all of the leaves fall, take a look at your trees and make sure they’re still healthy, especially trees that could fall on your home or a neighbor’s home. If there are branches up against your house, it’s a good idea to trim them away before winter, so you don’t have ice-coated branches against your siding or windows.

10. Consider switching energy companies for the best Winter electricity rates

We fundamentally believe that the right energy company can make all the difference in your electricity bill. If you’re actively taking steps to reduce your energy usage and you’re not seeing results, you need a new plan or a new energy company. Here’s our guide on how to shop for electricity in Texas that makes it easy for you to decide and take that next step.

The post Top 10 Ways to Prepare Your Home for the Texas Winter Season appeared first on Chariot Energy.

]]>
Cost Effective Heating: Best Ways to Heat Your Home and Save on Energy Bills https://chariotenergy.com/blog/cost-effective-heating-best-ways-to-heat-your-home-and-save-on-energy-bills/ Thu, 28 Aug 2025 13:12:00 +0000 https://chariotstg2020.wpenginepowered.com/?p=21197 Keeping your home warm during the colder months is essential, but it doesn’t have to break the bank. Finding the most cost-effective heating solution can save you a significant amount of money while ensuring your home stays comfortable. This article explores the best options for heating your house affordably, focusing on energy efficiency, initial investment, […]

The post Cost Effective Heating: Best Ways to Heat Your Home and Save on Energy Bills appeared first on Chariot Energy.

]]>

Keeping your home warm during the colder months is essential, but it doesn’t have to break the bank. Finding the most cost-effective heating solution can save you a significant amount of money while ensuring your home stays comfortable. This article explores the best options for heating your house affordably, focusing on energy efficiency, initial investment, and ongoing costs.

Understanding Cost-Effective Heating

When discussing cost-effective heating, it’s important to consider both the upfront costs and the long-term expenses. The goal is to find a heating method that minimizes your overall costs while maximizing comfort and efficiency. This involves evaluating different heating systems, energy sources, and usage habits.

Energy-Efficient Heating Systems

Energy efficiency is a key factor in reducing heating costs. The more efficient a heating system, the less energy it uses to produce the same amount of heat. Here are some of the most cost-effective heating systems available:

  • Heat Pumps: Heat pumps are one of the most efficient ways to heat a home. They work by transferring heat from the outside air or ground into your home, using electricity. While the initial installation can be pricey, the long-term savings on energy bills make heat pumps a popular choice for homeowners looking for cost-effective heating. According to the U.S. Department of Energy, heat pumps can reduce electricity use for heating by about 50% compared to electric resistance heating such as furnaces and baseboard heaters.
  • Gas Furnaces: Modern gas furnaces, especially those with high Annual Fuel Utilization Efficiency (AFUE) ratings, are also a cost-effective heating option. They convert gas into heat with minimal waste, providing reliable warmth even in very cold climates. The upfront cost is generally lower than that of heat pumps, making gas furnaces a good balance between initial investment and long-term savings.
  • Solar Heating Systems: Although the upfront cost is higher, solar heating systems are another excellent choice for those interested in cost-effective heating. They harness the power of the sun to heat your home, which can lead to significant savings on your energy bills over time. Pairing solar panels with a backup system, like a heat pump or furnace, ensures your home remains warm even on cloudy days. A great option for solar energy providers is Chariot Energy, which offers competitive rates and high-quality solar panels.

Comparing Energy Costs

Different heating methods come with varying energy costs. Here’s a comparison of some common heating sources:

  • Electricity: On average, electricity is more expensive than gas, making it less cost-effective unless used with highly efficient systems like heat pumps.
  • Natural Gas: Natural gas is generally cheaper than electricity, making it a more cost-effective heating option, especially when paired with a high-efficiency furnace.
  • Solar Energy: While there is a significant upfront cost, solar energy is essentially free after installation, offering the most cost-effective heating solution over the long term.

To illustrate, consider the following example: The average household in the U.S. spends about $2,060 annually on energy bills, with nearly half of that going toward heating. By switching to a heat pump or solar heating system, a homeowner could reduce their heating costs by up to 50%, saving approximately $515 annually. This demonstrates the long-term benefits of investing in cost-effective heating systems.

Additional Tips for Cost-Effective Heating

Aside from choosing the right system, there are other ways to ensure cost-effective heating:

  • Insulation: Proper insulation can drastically reduce heating costs by keeping the heat inside your home. Insulating your walls, attic, and floors prevents warm air from escaping, which means your heating system doesn’t have to work as hard.
  • Smart Thermostats: Investing in a smart thermostat allows you to better control your heating system, reducing energy waste. These devices learn your schedule and adjust the temperature accordingly, ensuring your home is only heated when necessary.
  • Regular Maintenance: Keeping your heating system well-maintained ensures it operates at peak efficiency, prolonging its life and saving you money on repairs and energy bills.

Conclusion

Finding the most cost-effective way to heat your house requires a balance between initial investment and long-term savings. Heat pumps, gas furnaces, and solar heating systems are all excellent options, depending on your specific needs and budget. By choosing energy-efficient systems, utilizing proper insulation, and maintaining your equipment, you can keep your home warm without overspending.

For those interested in exploring solar heating as a cost-effective heating solution, consider Chariot Energy, a trusted provider that can help you reduce your energy costs while benefiting the environment.

References

The post Cost Effective Heating: Best Ways to Heat Your Home and Save on Energy Bills appeared first on Chariot Energy.

]]>
Save on Your Electricity Bill All Year Long https://chariotenergy.com/blog/ways-to-save-money-on-your-electricity-bill/ Thu, 15 May 2025 17:40:22 +0000 https://chariotstg2020.wpenginepowered.com/?p=18592 Renewable energy without premium pricing or expensive equipment is a tall order, but Chariot Energy is here to change that. Chariot offers some of the cheapest green energy options, often lower than electricity generated by coal or gas. However, inflation and Texas’ turbulent supply and demand market has energy consumers pinching pennies. In this guide, you will […]

The post Save on Your Electricity Bill All Year Long appeared first on Chariot Energy.

]]>
Renewable energy without premium pricing or expensive equipment is a tall order, but Chariot Energy is here to change that.

Chariot offers some of the cheapest green energy options, often lower than electricity generated by coal or gas. However, inflation and Texas’ turbulent supply and demand market has energy consumers pinching pennies.

In this guide, you will see some energy saving tips to limit your exposure to high bills.

Turn Off What We Don’t Use

This may seem obvious, but our daily habits contribute to burning through cash we really don’t have to. Saving energy results in saving money, and more than one might think. Try to do your best turning of lights and electronics you aren’t using and check out this list of appliances you may not even realize are draining energy…and your wallet.

A lot of devices, from computers to appliances, draw phantom power even when not in use. This may be a small amount, but over time it adds up. Something as simple as a phone’s charging brick can suck up a steady stream of 25 watts.

Don’t just make sure to turn off lights after using them. Perform a thorough check of your home to identify devices that could be sucking power, even though they’re turned off.

Get used to shutting off devices completely rather than putting them into sleep mode. Turn off computers and video game consoles, and unplug power tools or device chargers.

These little things add up quickly. They could result in significant improvements to energy efficiency in the long term.

Save Money by Investing in Smart Devices

Smart devices help to make our lives more convenient. But they can help out with our savings goals. Smart devices help with energy saving by putting household electrical usage on a schedule.

For example, we could program the lights to turn off when we’re out the door for work. We could program outdoor lamps to switch on at sunset. We can use smart plugs that shut off air conditioners or washing machines when we’re not at home.

The benefit of smart devices is they give us access to our homes while we’re away. We can open the app while not at home and turn off the lights if we accidentally left them on.

With electricity markets in a crunch, this can take the burden off our shoulders of making sure our kids turn off the lights.

Further, we can install electricity monitoring devices to gauge how much energy we use. This allows us to adjust if we discover a sudden spike in usage.

Purchase High-Efficiency Bulbs and Devices

When money is tight, we’re likely to opt for the cheapest lightbulbs. But believe it or not, these devices cost us more in the end. They use outdated incandescent technology that offers weaker lighting with worse efficiency.

When we purchase lighting, we should aim for high-efficiency LED or fluorescent bulbs. They do cost more, but the energy savings when we purchase electricity will be noticeable.

The same goes for our appliances. A cheaper appliance with low energy efficiency will cost us more in the end. Think of buying better, high-efficiency devices as a savings plan. 

Avoid High Energy Usage During Peak Hours

We’ve all heard of the duck curve. This is a duck-shaped graph that depicts when people use the most energy. When it peaks during the daytime and evening, the Federal Energy Regulatory Commission records the highest strain on Texas’ grid.

To compensate for this, a power supplier will drive up prices during this time. Retail electricity will cost us more per kilowatt hour, increasing our energy bill. Buying electricity during off-peak hours will save us a lot.

For example, avoid running high-energy devices like a dishwasher or dryer during these times, curb air conditioning use as much as possible. Some would be surprised by how much energy they can save by lowering the temperature by just a few degrees.

Using fans can make up for the lack of air conditioning. A fan uses a lot less energy but allows us to maintain a cool, comfortable home. 

Use Home Air Conditioning as a “Battery”

Air conditioning is a necessity in Texas’ blistering hot summers. But as we mentioned above, air conditioning takes up a lot of electricity. Fortunately, there may be a solution to this.

Some Texans will cool their house to a much colder temperature at night. This may be several degrees lower than even the temperature they set during the daytime. It leaves the house chilly, but it does so when the energy is cheapest.

As long as the home has good insulation, that cold temperature will take a long time to get warmer. It may not be until late afternoon that someone would need to turn on their air conditioner again. The result is massive savings in electricity.

Since most people enjoy a cold house when they sleep–to bundle up–this won’t affect comfort. The mornings might be a bit nippy, but it’s easy to grab a blanket.

After leaving the house, there’s no need to turn on the air conditioner until arriving home. By then, electricity prices are lower than they are during peak hours.

Find the Most Competitive Energy Rates in Texas With Chariot Energy

Electricity is a significant cost for Texas households during this energy crisis. Every owner should be on the lookout for ways to save money when buying electricity. Making just a few small changes can result in huge savings on any energy bill.

Live in an apartment, townhouse, or rental and think you can’t go with renewable energy? Well, now you can! Find a plan that works for you with Chariot Energy.

There’s no down payment, no 15-20 year commitment, and no equipment to maintain. Feel good about using green energy, and get it on a budget.

The post Save on Your Electricity Bill All Year Long appeared first on Chariot Energy.

]]>
What Is the Best Electricity Plan for Me? https://chariotenergy.com/blog/what-is-the-best-electricity-plan-for-me/ Thu, 27 Feb 2025 23:13:17 +0000 https://chariotstg2020.wpenginepowered.com/?p=18101 Whether you’re moving into a new house and need to sign up for electric service because your existing plan will be ending soon (or you’re unhappy with it), deciding on an energy plan can seem like a daunting task. There are a million providers to choose from, there’s a lot of unfamiliar jargon thrown around, […]

The post What Is the Best Electricity Plan for Me? appeared first on Chariot Energy.

]]>
Whether you’re moving into a new house and need to sign up for electric service because your existing plan will be ending soon (or you’re unhappy with it), deciding on an energy plan can seem like a daunting task. There are a million providers to choose from, there’s a lot of unfamiliar jargon thrown around, and then there’s the whole process of setting up an account.

Not to mention that if you make a mistake and choose a plan that results in high bills – or you discover the hard way that the electric company’s customer service is lacking – well, good luck getting out of it without paying an early termination penalty in the hundreds of dollars.

How can you avoid these problems and sign up for the right plan the first time around? The answer lies in understanding your needs and the details of the electricity plans each company is offering. So let’s take a look at what you need to know to make the right choice for you.

Everything You Need to Consider to Choose the Best Electricity Plan

Selecting an electricity plan is like selecting any other service — you agree to buy a product (in this case, electricity) from a service provider for a specified length of time. To make the best decision, you’ll need to be informed about the variables – the electricity rate, the contract length, and the terms of service.

Understanding How Billing Works

Your electricity bill is based on your usage per kilowatt-hour. So, first things first — how many kilowatts of electricity does your household use per month? Looking at your past bills can give you an idea of your usage history. And, if you can, consider the entire year. Electricity usage changes from the hot months to the cold, and you want to make sure you’ve accounted for that in your decision-making process.

So as an example, let’s say you use 1500 kWh per month and your rate per kWh is 9.4¢. That means your monthly usage charges would be 1500 x $0.094, or $141 plus taxes and any other fees.

Fixed-Rate Plans

A fixed-rate plan is a plan in which the kWh rate doesn’t fluctuate. It’s set at a certain price and doesn’t change, regardless of the market, your usage, the time of day, or anything else. Fixed-rate plans typically have a slightly higher cost per kilowatt-hour, but they also aren’t subject to rate spikes like a variable-rate plan. You can do the laundry any time of day, any day of the week, and there won’t be any surprises when the bill comes.

Time-of-Use Plans

Time-of-use are just that – plans with a rate that varies. They often have an attractive, low rate during certain times of the day — free nights and weekends, for example — and a higher rate during other usage periods. The factors that affect how much the rate varies include demand, weather, and the market. For some people, time-of-use plans are a great option that gives them a level of freedom and flexibility that meets their needs and works with their lifestyle. For others, it requires too much thought and oversight.

What Contract Term Is Right for You?

Electric plan contract lengths come in two varieties — long- and short-term. Long-term plans are usually 12, 24, 48, and even 60 months. They make the most sense for homeowners who know they’re not going to be moving and want to lock in a stable rate. Short-term contracts operate on a month-to-month basis, while some allow for a six-month term. They’re ideal for renters or people who want the freedom of not being committed long-term.

Do You Want Renewable Energy?

Green and renewable sources of energy like wind, solar, and carbon-neutral natural gas are in full swing, and some electricity providers offer electric plans that provide power generated only from these sources instead of traditional fossil fuels. This means that if environmentally friendly forms of energy creation are important to you, you have the option of purchasing that type of electricity. And conversely, you can also choose fossil fuel-created electricity. The choice is yours.

One thing to watch out for when searching for green energy plans, however, is that some companies charge a premium for renewable energy. In other words, it might cost a little more per kilowatt-hour than non-renewable plans. A lot of the time, the price discrepancy isn’t because it costs more to produce this sort of electricity, but rather because the company is simply charging a premium for what it knows some people will view as the more desirable product. (At Chariot, we only offer renewable electricity plans, and they’re powered by Texas-made solar energy. Best of all, we don’t charge a premium for your environmentally friendly energy choices.)

The Fine Print

Every service plan includes fine print, and electric service is no different. It might contain disclaimers about service reliability or your ability to seek compensation if you’re inconvenienced by the electric company. It will also detail the penalties if you end the contract early. Make sure you read and understand this, so there are no surprises later.

Early Termination Fees

Perhaps the “fine print” item that’s the biggest pain point with electricity plans is the early termination fee. If you sign up for a long-term electricity plan and cancel early, you might be liable for an early termination fee. These typically don’t apply if you move addresses. But if you switch to a different provider before your current term ends, that’s often when people find themselves paying an early termination fee.

However, don’t let an early termination fee needlessly keep you locked into a plan that’s not right for you. For example, if you’re in a variable-rate plan that’s resulting in billing spikes every month, do the math and calculate what it will cost to stay in the plan versus paying the termination fee and signing on for a better rate with a new provider. It might make better financial sense to pay and switch.

Choose the Plan That’s Right for You

There is a lot to think about when choosing the best electricity plan for your household, but with a little research and due diligence, you can be a smart and informed consumer who has a great plan with a great company.

If you’re in the market for a new provider or it’s been a while since you shopped around, check out the electricity plans we offer at Chariot. We provide 100% renewable electricity plans with energy generated right here in the great state of Texas. And we’re eager to earn your business the right way — no bad deals or gimmicks, just fair, reliable service with your satisfaction as the top priority.

The post What Is the Best Electricity Plan for Me? appeared first on Chariot Energy.

]]>
Most Manufacturing and Workshop Business Owners Don’t Know About Their Energy Consumption https://chariotenergy.com/blog/most-manufacturing-and-workshop-business-owners-dont-know-about-their-energy-consumption/ Tue, 11 Feb 2025 15:52:52 +0000 https://chariotstg2020.wpenginepowered.com/?p=21704 “No. 8 Will Shock you!” Introduction Running a manufacturing business or workshop is tough. Between managing employees, keeping up with orders, and making sure no one turns your shop floor into a reality TV-worthy disaster, energy costs are probably the last thing on your mind. But here’s the kicker—your energy bill is silently eating away […]

The post Most Manufacturing and Workshop Business Owners Don’t Know About Their Energy Consumption appeared first on Chariot Energy.

]]>
“No. 8 Will Shock you!”

Introduction

Running a manufacturing business or workshop is tough. Between managing employees, keeping up with orders, and making sure no one turns your shop floor into a reality TV-worthy disaster, energy costs are probably the last thing on your mind. But here’s the kicker—your energy bill is silently eating away at your profits, and you might not even realize it!

Did you know that industrial facilities account for nearly 30% of total energy consumption in the U.S.? (source) That’s a staggering number, and if your shop isn’t optimized for efficiency, you could be wasting thousands of dollars every year.

But don’t worry! We’ve got you covered with the best Manufacturing and Workshop energy saving tips that will help you cut down waste, reduce costs, and keep your operations running efficiently. Buckle up—because No. 8 is going to blow your mind!


1. The Hidden Costs of Energy in Manufacturing and Workshops

Most business owners assume their machines only use power when they’re running. Surprise! Even idle equipment, inefficient processes, and tiny leaks can cost you big time.

How Much Energy Are You Really Using?

  • The average U.S. manufacturing plant spends $6.7 billion annually on electricity (source).
  • Phantom energy use (power consumed when equipment is off but still plugged in) can account for 10% of total electricity costs.
  • The biggest offenders? Air compressors, old motors, and poor HVAC systems.

Solution? Conduct an energy audit (many power companies offer free or subsidized ones). Knowing where your power is going is the first step toward saving money.


2. Air Compressors: The Silent Energy Hog

Your air compressor is like that one friend who “just needs a little help moving” and ends up making you haul furniture for six hours. It looks harmless but consumes more energy than you think!

How to Reduce Air Compressor Energy Waste:

  • Fix leaks – Up to 30% of compressed air is wasted due to leaks.
  • Optimize pressure settings – Running at higher pressure than needed wastes energy.
  • Use Variable Speed Drive (VSD) compressors – These adjust power use based on demand, cutting costs by up to 50%.
  • Turn it off – Don’t leave compressors running when not in use.

💡 Case Study: A Texas-based auto repair shop cut 20% off their energy bill just by fixing air compressor leaks and lowering pressure settings!


3. Power Tools and Machinery: The Unnoticed Energy Drain

Whether it’s a table saw, CNC machine, or a lathe, your power tools don’t need to be guzzling electricity 24/7.

Ways to Cut Energy Waste:

  • Use high-efficiency motors (IE3 or IE4-rated) – These save 15-30% more energy than standard motors.
  • Install regenerative braking – Especially for CNC machines, this reuses energy instead of wasting it.
  • Turn off machines when idle – Sounds obvious, but so many businesses leave tools running unnecessarily.
  • Smart scheduling – Run heavy machinery during off-peak hours when electricity rates are lower.

🔧 Example: A small furniture manufacturer in California saved $12,000 per year by upgrading to energy-efficient motors and shutting down idle machinery.


4. Welding Equipment: The High-Voltage Culprit

Welding tools require high amounts of electricity, but with a few tweaks, you can slash their energy use.

Energy-Saving Welding Tips:

  • Use inverter-based welders – They consume 50% less power than traditional transformers.
  • Reduce idle time – Train employees to turn off welders when not in use.
  • Use power factor correction devices – They reduce wasted electricity and lower costs.
  • Switch to pulsed welding – Uses short bursts of energy instead of continuous flow, cutting power use.

🔥 Fun Fact: Some modern welding machines can cut energy use by half while still producing the same output. Time for an upgrade?


5. Heating and Cooling Systems: The Overlooked Cost Factor

Workshops can get HOT. But cooling (or heating) inefficiently is a money pit.

Ways to Save on HVAC Costs:

  • Use programmable thermostats – Set schedules to avoid heating/cooling empty spaces.
  • Install industrial fans – They improve air circulation and reduce HVAC strain.
  • Regularly clean air filters – Dirty filters increase energy use by up to 15%.
  • Seal leaks in doors and windows – Prevents wasted heating/cooling.

🏭 Example: A manufacturing plant in Florida reduced cooling costs by 30% just by installing smart thermostats and sealing leaks.


6. Industrial Lighting: Shedding Light on Energy Waste

Still using fluorescent or halogen lights? Time for an upgrade!

Lighting Efficiency Hacks:

  • Switch to LED bulbs – Uses 75% less energy and lasts 25x longer.
  • Install motion sensors – Automatically turns off lights when areas are unoccupied.
  • Use daylight harvesting – Maximizes natural light to reduce artificial lighting needs.

💡 Fact: Businesses that switch to LED lighting cut their lighting costs by up to 60%.


7. Phantom Loads: The Energy You’re Paying for Without Knowing

Did you know that even when “off,” devices like chargers, idle machines, and standby electronics still use power?

How to Eliminate Phantom Loads:

  • Use smart power strips – Automatically cut power to idle devices.
  • Unplug non-essential equipment after hours.
  • Use automatic shutdown features on office electronics.

🔌 Example: A machine shop saved $3,000 annually just by installing smart power strips and reducing phantom loads.


8. The Shocking Energy Waster Most Business Owners Ignore!

🔴 Surprise! Your compressed air system might be your biggest energy waster!

A poorly maintained compressed air system can waste more electricity than all your lights and tools combined. A single 1/8-inch hole in your air lines could cost you over $1,200 a year in wasted electricity.

Solution? Fix leaks, optimize pressure, and use VSD compressors.


9. Employee Training: The Human Factor in Energy Efficiency

Your employees can be your best energy-saving asset—if trained properly.

Ways to Engage Employees in Energy Conservation:

  • Offer incentives for energy-efficient behavior.
  • Post reminders in key areas.
  • Assign energy efficiency champions to oversee savings efforts.

10. Renewable Energy: The Future of Manufacturing and Workshops

Going green isn’t just good for the planet—it’s great for your wallet.

How to Incorporate Green Energy:

  • Install solar panels – Cuts electricity costs by 50% over time.
  • Check for government incentives for renewable energy adoption.
  • Switch to a green energy provider like Chariot Energy

🌞 Example: A Texas-based metal shop cut 40% off its energy bill by installing solar panels and switching to a renewable energy provider.


Conclusion

Cutting down on energy waste doesn’t have to be complicated. Follow these Manufacturing and Workshop energy saving tips, and you’ll save money, improve efficiency, and reduce your environmental impact.

Ready to make a change? Check out Chariot Energy for affordable, sustainable energy solutions tailored to businesses like yours!

The post Most Manufacturing and Workshop Business Owners Don’t Know About Their Energy Consumption appeared first on Chariot Energy.

]]>